MODELMAKING GURU MODELS FOR SALE!
Welcome! Here you will find pieces that are currently available for sale either directly from me, or though my eBay store at the specific link in the item description. Take a look! Please also refer to the Contact & FAQ page for more information on buying and prices before you commit to a purchase.
As always, click on any image to embiggen it.
Please note: if an item is listed for sale on eBay I will not enter into discussion of the sale or accept offers outside of eBay.
Welcome! Here you will find pieces that are currently available for sale either directly from me, or though my eBay store at the specific link in the item description. Take a look! Please also refer to the Contact & FAQ page for more information on buying and prices before you commit to a purchase.
As always, click on any image to embiggen it.
Please note: if an item is listed for sale on eBay I will not enter into discussion of the sale or accept offers outside of eBay.
FOR SALE: Forgeworld Warhammer 40K Death Korps Of Krieg Macharius Vanquisher (PROFESSIONAL DISPLAY STANDARD MODEL)
Fully painted and weathered (build gallery here)
LIMITED TIME OFFER 15% OFF
£600.00 plus shipping.
CLICK HERE TO BUY THIS MODEL
Available for sale is this unique model of a Warhammer 40K Death Korps Of Krieg Macharius Vanquisher. The Vanquisher is a tank-buster and a siege-breaker armed with awesome Twin-Linked Vanquisher Cannons, Twin-Linked Heavy Stubbers, sponson-mounted Heavy Bolters and a pintle-mounted heavy Stubber.
This is a fully assembled and painted resin Forgeworld Macharius Vanquisher model. As well as some slight modification and customisation I have painted the model to a display or semi-collector standard using acrylics, oils and enamels and the finished display piece represents close to 150 hours' work. The turret is fully removeable and as a bonus the rear engine cover can also be removed to show the engine detail. The commander and driver figures are glued in place and cannot be removed. Some slight rivet and greeble detail has been added and a barbed wire anti-mantle roll is mounted just in front of the glacis plate. All the onboard weapons are fixed in place and cannot be moved or repositioned. During pinning of the track units a pin fell into the hollow hull and now resides in there forever, never to been seen again, so don't worry if you hear a tiny rattle - consider it an easter egg! Death Korps markings have been used. The model has been fully painted and weathered including steps such as base colours, pre-shading, post-shading, washes, streaking, chipping, dry brushing, decals, rust effects, dust/dirt effects and graphite highlighting. As a bonus, the model is being shipped to you inside a Games Workshop Skirmish transport case, which you can keep (foams not included). The turret and hull are separated for shipping and the engine cover is in a small baggie.
Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk. The barbed wire is very delicate and is attached with CA Glue and can easily separate from the hull if squished, so avoid touching it (if this should happen, simply re-attach it with a tiny dot of CA glue).
I have signed the model inside.
I do not accept best offers - the listed price is based on the cost of the kits, materials used and a reasonable hourly rate for the work carried out. For both your and my protection, I can only accept enquiries and questions directly via eBay messages.
CLICK HERE TO BUY THIS MODEL
Fully painted and weathered (build gallery here)
LIMITED TIME OFFER 15% OFF
£600.00 plus shipping.
CLICK HERE TO BUY THIS MODEL
Available for sale is this unique model of a Warhammer 40K Death Korps Of Krieg Macharius Vanquisher. The Vanquisher is a tank-buster and a siege-breaker armed with awesome Twin-Linked Vanquisher Cannons, Twin-Linked Heavy Stubbers, sponson-mounted Heavy Bolters and a pintle-mounted heavy Stubber.
This is a fully assembled and painted resin Forgeworld Macharius Vanquisher model. As well as some slight modification and customisation I have painted the model to a display or semi-collector standard using acrylics, oils and enamels and the finished display piece represents close to 150 hours' work. The turret is fully removeable and as a bonus the rear engine cover can also be removed to show the engine detail. The commander and driver figures are glued in place and cannot be removed. Some slight rivet and greeble detail has been added and a barbed wire anti-mantle roll is mounted just in front of the glacis plate. All the onboard weapons are fixed in place and cannot be moved or repositioned. During pinning of the track units a pin fell into the hollow hull and now resides in there forever, never to been seen again, so don't worry if you hear a tiny rattle - consider it an easter egg! Death Korps markings have been used. The model has been fully painted and weathered including steps such as base colours, pre-shading, post-shading, washes, streaking, chipping, dry brushing, decals, rust effects, dust/dirt effects and graphite highlighting. As a bonus, the model is being shipped to you inside a Games Workshop Skirmish transport case, which you can keep (foams not included). The turret and hull are separated for shipping and the engine cover is in a small baggie.
Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk. The barbed wire is very delicate and is attached with CA Glue and can easily separate from the hull if squished, so avoid touching it (if this should happen, simply re-attach it with a tiny dot of CA glue).
I have signed the model inside.
I do not accept best offers - the listed price is based on the cost of the kits, materials used and a reasonable hourly rate for the work carried out. For both your and my protection, I can only accept enquiries and questions directly via eBay messages.
CLICK HERE TO BUY THIS MODEL
SOLD: Warhammer 40K Death Korps of Krieg Baneblade (PROFESSIONAL DISPLAY-STANDARD MODEL)
Fully painted and weathered (build gallery here)
£799.99 plus shipping.
THIS MODEL HAS BEEN SOLD
Available for sale is this unique model of the legendary Warhammer 40,000 Lord of War, the mighty Baneblade super-heavy tank. Ancient and revered, this Baneblade has served the Death Korps of Krieg for many yeas and on many fronts. Armed with the mighty Baneblade cannon, a coaxial autocannon, a pintle-mounted heavy stubber, four sets of twin-linked sponson-mounted heavy bolters, four sponson-mounted lascannons, a turret-mounted set of twin-linked heavy bolters on the glacis plate and who knows how many stowed M39 entrenching tools, this puppy is sure to dispatch multitudes of heretic and Xenos scum long before it's crew can die for the Emperor!
As well as some slight modification and customisation I have painted the model to a display or semi-collector standard using acrylics, oils and enamels and the finished display piece represents close to 150 hours' work. A resin Forgeworld Death Korps Tank command crew has been added, as well as parts from the Baneblade accessories set and some generic spare parts. The tank commander is presented within his own cupola which is friction-fit and removeable for storage or transportation. The gunner is also removeable and is held in place in the cupola with a magnet. The four sponsons are removeable and friction-fit only. The whip antennae are magnetised and can be removed for transport or storage (if the antennae on the turret appear all catawampus when you attach them, don't panic, just give them a little twirl so the magnets line up and they sit vertical). The turret is fully removeable, as is the glacis plate bolter turret. The engine cover behind the turret can be set open, closed, or removed to display the grubby workings inside. PLEASE NOTE: the sponson bolters, glacis plate turret bolters and sponson lascannon turrets are glued into their positions and cannot be rotated or pitched up/down. Death Korps markings have been used. The model has been fully painted and weathered including steps such as base colours, pre-shading, post-shading, washes, streaking, chipping, dry brushing, decals, rust effects, dust/dirt effects and graphite highlighting. Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk.
Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk. The barbed wire is very delicate and is attached with CA Glue and can easily separate from the hull if squished, so avoid touching it (if this should happen, simply re-attach it with a tiny dot of CA glue).
I have signed the model inside.
I do not accept best offers - the listed price is based on the cost of the kits, materials used and a reasonable hourly rate for the work carried out. For both your and my protection, I can only accept enquiries and questions directly via eBay messages.
THIS MODEL HAS BEEN SOLD
Fully painted and weathered (build gallery here)
£799.99 plus shipping.
THIS MODEL HAS BEEN SOLD
Available for sale is this unique model of the legendary Warhammer 40,000 Lord of War, the mighty Baneblade super-heavy tank. Ancient and revered, this Baneblade has served the Death Korps of Krieg for many yeas and on many fronts. Armed with the mighty Baneblade cannon, a coaxial autocannon, a pintle-mounted heavy stubber, four sets of twin-linked sponson-mounted heavy bolters, four sponson-mounted lascannons, a turret-mounted set of twin-linked heavy bolters on the glacis plate and who knows how many stowed M39 entrenching tools, this puppy is sure to dispatch multitudes of heretic and Xenos scum long before it's crew can die for the Emperor!
As well as some slight modification and customisation I have painted the model to a display or semi-collector standard using acrylics, oils and enamels and the finished display piece represents close to 150 hours' work. A resin Forgeworld Death Korps Tank command crew has been added, as well as parts from the Baneblade accessories set and some generic spare parts. The tank commander is presented within his own cupola which is friction-fit and removeable for storage or transportation. The gunner is also removeable and is held in place in the cupola with a magnet. The four sponsons are removeable and friction-fit only. The whip antennae are magnetised and can be removed for transport or storage (if the antennae on the turret appear all catawampus when you attach them, don't panic, just give them a little twirl so the magnets line up and they sit vertical). The turret is fully removeable, as is the glacis plate bolter turret. The engine cover behind the turret can be set open, closed, or removed to display the grubby workings inside. PLEASE NOTE: the sponson bolters, glacis plate turret bolters and sponson lascannon turrets are glued into their positions and cannot be rotated or pitched up/down. Death Korps markings have been used. The model has been fully painted and weathered including steps such as base colours, pre-shading, post-shading, washes, streaking, chipping, dry brushing, decals, rust effects, dust/dirt effects and graphite highlighting. Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk.
Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk. The barbed wire is very delicate and is attached with CA Glue and can easily separate from the hull if squished, so avoid touching it (if this should happen, simply re-attach it with a tiny dot of CA glue).
I have signed the model inside.
I do not accept best offers - the listed price is based on the cost of the kits, materials used and a reasonable hourly rate for the work carried out. For both your and my protection, I can only accept enquiries and questions directly via eBay messages.
THIS MODEL HAS BEEN SOLD
|
|
|
|
SOLD: Warhammer 40K Death Korps Banesword (PROFESSIONAL DISPLAY-STANDARD MODEL)
Fully painted and weathered (build gallery here)
£799.99 plus shipping.
THIS MODEL HAS BEEN SOLD
Available for sale is this unique model of the legendary Warhammer 40,000 Lord of War, the mighty Banesword super-heavy siege tank. Ancient and revered, this Banesword has served the Death Korps of Krieg for many yeas and on many fronts. Armed with the legendary Quake cannon, two sets of twin-linked sponson-mounted heavy bolters, two sponson-mounted lascannons, a dirty great twin-linked heavy bolter pair on the glacis plate and who knows how many stowed M39 entrenching tools, this puppy is sure to earn its name in battle before it's crew can die for the Emperor!
As well as some slight modification and customisation and a VERY jaunty faux-Caunter camouflage scheme (honestly, is there any point camouflaging a tank the size of an industrial estate?) I have painted the model to a display or semi-collector standard using acrylics, oils and enamels and the finished display piece represents close to 150 hours' work. A Forgeworld Death Korps Tank command figure has been added, as well as parts from the Baneblade accessories set and some generic spare parts. The tank commander is removeable and is held in place in the cupola with a magnet. The two sponsons are removeable and friction-fit only. The whip antenna is magnetised to the block at the rear side of the turret and can be removed for transport or storage. The turret is fully removeable and the interior of the main hull has been left unpainted to serve as storage hidey-hole for dice, token, markers or other small items. PLEASE NOTE: the sponson bolters and sponson lascannon turrets are glued into their positions and cannot be rotated or pitched up/down. Death Korps markings have been used. The model has been fully painted and weathered including steps such as base colours, pre-shading, post-shading, washes, streaking, chipping, dry brushing, decals, rust effects, dust/dirt effects and graphite highlighting. Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk.
I have signed the model inside
I do not accept best offers - the listed price is based on the cost of the kits, materials used and a reasonable hourly rate for the work carried out. For both your and my protection, I can only accept enquiries and questions directly via eBay messages.
THIS MODEL HAS BEEN SOLD
Fully painted and weathered (build gallery here)
£799.99 plus shipping.
THIS MODEL HAS BEEN SOLD
Available for sale is this unique model of the legendary Warhammer 40,000 Lord of War, the mighty Banesword super-heavy siege tank. Ancient and revered, this Banesword has served the Death Korps of Krieg for many yeas and on many fronts. Armed with the legendary Quake cannon, two sets of twin-linked sponson-mounted heavy bolters, two sponson-mounted lascannons, a dirty great twin-linked heavy bolter pair on the glacis plate and who knows how many stowed M39 entrenching tools, this puppy is sure to earn its name in battle before it's crew can die for the Emperor!
As well as some slight modification and customisation and a VERY jaunty faux-Caunter camouflage scheme (honestly, is there any point camouflaging a tank the size of an industrial estate?) I have painted the model to a display or semi-collector standard using acrylics, oils and enamels and the finished display piece represents close to 150 hours' work. A Forgeworld Death Korps Tank command figure has been added, as well as parts from the Baneblade accessories set and some generic spare parts. The tank commander is removeable and is held in place in the cupola with a magnet. The two sponsons are removeable and friction-fit only. The whip antenna is magnetised to the block at the rear side of the turret and can be removed for transport or storage. The turret is fully removeable and the interior of the main hull has been left unpainted to serve as storage hidey-hole for dice, token, markers or other small items. PLEASE NOTE: the sponson bolters and sponson lascannon turrets are glued into their positions and cannot be rotated or pitched up/down. Death Korps markings have been used. The model has been fully painted and weathered including steps such as base colours, pre-shading, post-shading, washes, streaking, chipping, dry brushing, decals, rust effects, dust/dirt effects and graphite highlighting. Although the model has been fully varnished and could be played in-game, it has been painted as a shelf-queen display model and as such the long-term durability of elements and materials used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk.
I have signed the model inside
I do not accept best offers - the listed price is based on the cost of the kits, materials used and a reasonable hourly rate for the work carried out. For both your and my protection, I can only accept enquiries and questions directly via eBay messages.
THIS MODEL HAS BEEN SOLD
|
|
|
|
SOLD: Vintage Leman Russ Tank (Tabletop Trauma Centre Rescue) UNIQUE EBAY RESCUE & REPAINT
Fully painted and weathered (build gallery here)
£224.99 plus shipping.
THIS PIECE HAS BEEN SOLD
Available for sale is this one-off unique Leman Russ battle Tank, rescued from a terrible paint job and totally re-painted by Modelmaking Guru for the YouTube series "Tabletop Trauma Centre".
The model was purchased built and painted from eBay in 2019 (see the BEFORE RESCUE" picture below), stripped, modified slightly and re-painted to a professional display standard. The entire was filmed for the YouTube series.
This is a vintage 1990s Leman Russ Battle Tank model, which included the black plastic tracks, and a now-rare white metal Commander figure. Some evidence of the original poor construction - such as visible gaps - were left as is, because the video series about this model was demonstrating how the original modeller could have painted it better. One locking tab on the turret was missing and this has not been replaced, but the turret will still lock into place satisfactorily. Some small details such as an Aquila, weapons and small detail parts were added but mostly the model remains as it was originally built. Original damage to the dozer blade was left as-is and incorporated into the weathering scheme as battle damage.
The model has been painted to a display standard using acrylics, oils, enamels and various weathering powders and represents over 50 hours' work. Although the model has been fully varnished and could be played in-game, it has been painted as a display model and as such the long-term durability of elements such as the weathering pigments used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play.
I have signed the model inside.
THIS PIECE HAS BEEN SOLD
Fully painted and weathered (build gallery here)
£224.99 plus shipping.
THIS PIECE HAS BEEN SOLD
Available for sale is this one-off unique Leman Russ battle Tank, rescued from a terrible paint job and totally re-painted by Modelmaking Guru for the YouTube series "Tabletop Trauma Centre".
The model was purchased built and painted from eBay in 2019 (see the BEFORE RESCUE" picture below), stripped, modified slightly and re-painted to a professional display standard. The entire was filmed for the YouTube series.
This is a vintage 1990s Leman Russ Battle Tank model, which included the black plastic tracks, and a now-rare white metal Commander figure. Some evidence of the original poor construction - such as visible gaps - were left as is, because the video series about this model was demonstrating how the original modeller could have painted it better. One locking tab on the turret was missing and this has not been replaced, but the turret will still lock into place satisfactorily. Some small details such as an Aquila, weapons and small detail parts were added but mostly the model remains as it was originally built. Original damage to the dozer blade was left as-is and incorporated into the weathering scheme as battle damage.
The model has been painted to a display standard using acrylics, oils, enamels and various weathering powders and represents over 50 hours' work. Although the model has been fully varnished and could be played in-game, it has been painted as a display model and as such the long-term durability of elements such as the weathering pigments used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play.
I have signed the model inside.
THIS PIECE HAS BEEN SOLD
|
|
|
|
SOLD: ORK WAZBOM BLASTAJET / DAKKAJET One-off, Pro-Painted (Modelmaking Guru/GoblinTV)
Fully painted and weathered (build gallery HERE)
£299.99 plus shipping.
THIS PIECE HAS BEEN SOLD
Available for sale is this unique Warhammer 40K Ork Wazbom Blastajet/Dakkajet model built and painted by Modelmaking Guru.
The model has been assembled and painted to a professional display standard. The entire process was filmed for the Goblin Gaming YouTube channel, GoblinTV, as a painting tutorial, which you can watch here.
The model was assembled as a hodgepodge of some of the possible kit variants rather than as a specific type, and is more of a Dakkajet. For packing and ease of transport, the rear gunner bubble is removeable and the entire model can be removed off of the base. The model is mounted on the standard flyer base which has a simple custom diorama with a few spare bits of debris lying about. The cockpit, pilot and gunner are also fully painted. And yes, the glyphs are translateable ^_^
The model has been painted to a display standard using acrylics, oils, enamels and various weathering powders and represents over 60 hours' work. Although the model has been fully varnished and could be played in-game, it has been painted as a display model and as such the long-term durability of elements such as the weathering pigments used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk.
I have signed the model under the base.
THIS PIECE HAS BEEN SOLD
Fully painted and weathered (build gallery HERE)
£299.99 plus shipping.
THIS PIECE HAS BEEN SOLD
Available for sale is this unique Warhammer 40K Ork Wazbom Blastajet/Dakkajet model built and painted by Modelmaking Guru.
The model has been assembled and painted to a professional display standard. The entire process was filmed for the Goblin Gaming YouTube channel, GoblinTV, as a painting tutorial, which you can watch here.
The model was assembled as a hodgepodge of some of the possible kit variants rather than as a specific type, and is more of a Dakkajet. For packing and ease of transport, the rear gunner bubble is removeable and the entire model can be removed off of the base. The model is mounted on the standard flyer base which has a simple custom diorama with a few spare bits of debris lying about. The cockpit, pilot and gunner are also fully painted. And yes, the glyphs are translateable ^_^
The model has been painted to a display standard using acrylics, oils, enamels and various weathering powders and represents over 60 hours' work. Although the model has been fully varnished and could be played in-game, it has been painted as a display model and as such the long-term durability of elements such as the weathering pigments used cannot be guaranteed to survive the regular handling and rough-and-tumble of tabletop play and you do so at your own risk.
I have signed the model under the base.
THIS PIECE HAS BEEN SOLD
|
|
|
|
SOLD: Games Workshop Warhammer 40K Stormwolf Assault Craft (Stormfang Gunship Variant) & Diorama Base
Fully painted and weathered (see a complete build gallery here)
£499.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish so if you would like to see the build and paint in action, go check it out right here.
This is a lovingly painted and weathered Warhammer 40K Stormfang Gunship, built as a Storm Wolf Assault Craft. Included with the flyer model is the custom diorama base which includes two custom Space Wolf figures in a ruined, snowy and deserted battleground, one on a custom Space Wolves Space Marine Bike.
The Stormwolf is equipped with twin-linked Hellfrost Cannons atop the cockpit, and twin-linked heavy Bolters on the sponsons. It also features an opening fore access ramp and fully-painted and weathered interior passenger cabin. The cockpit and pilot are also given a detailed paint scheme and the canopy is painted as frame-only to show this off. As with the pilot, the the diorama figures are painted as members of the Ragnar Great Company and include a standing Marine with a combat knife and double-bladed chainsword, and the Swiftclaw on the bike wields a Grav Pistol. The bike, of course, carries twin Bolters.
More than 100 hours of painstaking work have gone into this build, using Citadel, Ammo by Mig and Vallejo paints, enamel weathering products and weathering pigments and powders. Although no lighting is installed, the interior of the Stormwolf is fully painted and weathered, and the model can be displayed with the access ramp open or closed. The model has been fully protected with varnishes, allowing it to be used in gameplay if you wish. The Stormwolf can be lifted off the diorama for mounting on a standard flyer base. However, this is primarily a display model, so it is strongly suggested that you transfer the flyer to a standard flyer base for gameplay purposes to protect the snow effects on the base. It is also suggested that you handle the model by the clear flyer base stalk and not the model itself during gameplay, to avoid unnecessary wear and tear on the paintwork.
Whether you want this to dominate your display cabinet, have a soft spot for SPESS PUPPEHS, or just want to have the most outstanding looking model on the table, this is the model for you. I am not listing this item on eBAY and payment will only be accepted via bank transfer- if you would like to purchase it, please get in touch via the contact page and let me know where you are, and I will reply to you within 24 hours with a final price that includes cost of shipping.
THIS PIECE HAS BEEN SOLD.
Fully painted and weathered (see a complete build gallery here)
£499.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish so if you would like to see the build and paint in action, go check it out right here.
This is a lovingly painted and weathered Warhammer 40K Stormfang Gunship, built as a Storm Wolf Assault Craft. Included with the flyer model is the custom diorama base which includes two custom Space Wolf figures in a ruined, snowy and deserted battleground, one on a custom Space Wolves Space Marine Bike.
The Stormwolf is equipped with twin-linked Hellfrost Cannons atop the cockpit, and twin-linked heavy Bolters on the sponsons. It also features an opening fore access ramp and fully-painted and weathered interior passenger cabin. The cockpit and pilot are also given a detailed paint scheme and the canopy is painted as frame-only to show this off. As with the pilot, the the diorama figures are painted as members of the Ragnar Great Company and include a standing Marine with a combat knife and double-bladed chainsword, and the Swiftclaw on the bike wields a Grav Pistol. The bike, of course, carries twin Bolters.
More than 100 hours of painstaking work have gone into this build, using Citadel, Ammo by Mig and Vallejo paints, enamel weathering products and weathering pigments and powders. Although no lighting is installed, the interior of the Stormwolf is fully painted and weathered, and the model can be displayed with the access ramp open or closed. The model has been fully protected with varnishes, allowing it to be used in gameplay if you wish. The Stormwolf can be lifted off the diorama for mounting on a standard flyer base. However, this is primarily a display model, so it is strongly suggested that you transfer the flyer to a standard flyer base for gameplay purposes to protect the snow effects on the base. It is also suggested that you handle the model by the clear flyer base stalk and not the model itself during gameplay, to avoid unnecessary wear and tear on the paintwork.
Whether you want this to dominate your display cabinet, have a soft spot for SPESS PUPPEHS, or just want to have the most outstanding looking model on the table, this is the model for you. I am not listing this item on eBAY and payment will only be accepted via bank transfer- if you would like to purchase it, please get in touch via the contact page and let me know where you are, and I will reply to you within 24 hours with a final price that includes cost of shipping.
THIS PIECE HAS BEEN SOLD.
|
|
|
|
SOLD: Jakks Pacific 1/3 Scale 31" Halo 5 Guardians Master Chief
Fully painted and weathered
£300.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish for Patreon supporters, so if you would like to see the build and paint in action, go check it out right here.
This is a fully re-painted and weathered Jakks Pacific 31" Master Chief action figure. Over the course of approximately 40 hours the rather plain figure was repainted and weathered to more accurately represent the in-game asset of the Master Chief using a mixture of Citadel, Ammo and Tamiya acrylic paints and 502 Abteilung oil paints. The visor was completely re-worked to look more as it appears on the game model, colours were accurized and subtle chipping, scuffing and weathering was added. The ammo counter on the file was scratch-built. Overall, this gives a huge and impressive piece that will dominate any collection and be an awesome trophy for a true Halo fan.
THIS PIECE HAS BEEN SOLD.
Fully painted and weathered
£300.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish for Patreon supporters, so if you would like to see the build and paint in action, go check it out right here.
This is a fully re-painted and weathered Jakks Pacific 31" Master Chief action figure. Over the course of approximately 40 hours the rather plain figure was repainted and weathered to more accurately represent the in-game asset of the Master Chief using a mixture of Citadel, Ammo and Tamiya acrylic paints and 502 Abteilung oil paints. The visor was completely re-worked to look more as it appears on the game model, colours were accurized and subtle chipping, scuffing and weathering was added. The ammo counter on the file was scratch-built. Overall, this gives a huge and impressive piece that will dominate any collection and be an awesome trophy for a true Halo fan.
THIS PIECE HAS BEEN SOLD.
|
|
SOLD: Warhammer 40K Space Marine Landspeeder Storm
Painted and weathered, includes terrain added to flight base.
£250.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish, so if you would like to see the build and paint in action, go check it out right here.
This is a fully painted and weathered build of Games Workhop's Space Marine Landspeeder Storm. It was assembled and given a full paint job in a custom colour scheme, with subtle nods towards the 'eavy Metal painting style. Citadel paints were used exclusively, The vehicle has been lightly weathered and although given a custom colour scheme, the figures are painted similar to Cadian troops.
The flight base has been enhanced with a small diorama setting.
THIS PIECE HAS BEEN SOLD.
Painted and weathered, includes terrain added to flight base.
£250.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish, so if you would like to see the build and paint in action, go check it out right here.
This is a fully painted and weathered build of Games Workhop's Space Marine Landspeeder Storm. It was assembled and given a full paint job in a custom colour scheme, with subtle nods towards the 'eavy Metal painting style. Citadel paints were used exclusively, The vehicle has been lightly weathered and although given a custom colour scheme, the figures are painted similar to Cadian troops.
The flight base has been enhanced with a small diorama setting.
THIS PIECE HAS BEEN SOLD.
SOLD: Custom Painted & Weathered: Bandai 1/60 Strike Gundam ONE-OFF PRODUCTION
Painted and weathered, includes mobile suit, shield, beam rifle and armour schneider x2. Model does not have lighting.
£350.00 plus shipping
THIS PIECE HAS BEEN SOLD.
The entire build was filmed from start to finish, so if you would like to see the build and paint in action, go check it out right here.
This is a fully painted and weathered build of Bandai's 1/60 Strike Gundam (no-grade). At 1/60 scale, this one-off unique display model will dominate any display space and be the pride of any Gunpla collection! The model has been hand-crafted over 100 hours using many techniques and products to have a used, battle-hardened and weathered look. The model retains all of its poseability with working joints at the ankles, knees, hips, waist, elbows, wrists, fingers, shoulders and neck. I have filled seams in the head, legs and rifle. and fully painted and weathered the model with an array of products including acrylics, lacquers, enamels, oils, pastels, graphite and pigments. Extra decals have been added to the existing kit markings for extra detail and realism, and to add a hint of that Ver. Ka feel. The inner frame parts were painted using Mr. Hobby Mr. Metal Color lacquers to get a nice shiny (but not clean) metallic sheen that contrasts with the matt armour. It no longer looks like a toy but a used, roughed-up vehicle of war.
THIS PIECE HAS BEEN SOLD.
|
|
SOLD: Revell 1/32 Colonial Viper Mk. II
Painted and weathered, includes wooden display base
£149.99
THIS PIECE HAS BEEN SOLD.
The European release of Moebius' 1/32 Colonial Viper Mk. II is through Revell of Germany. Fully assembled, painted and weathered to represent Apollo's Mk. II bird in need of some attention from Chief Tyrol. This model was built as a non-ownership commission for eModels.co.uk and the build was filmed in a series of twelve videos, which you can see at this link. As I already have a Viper in my cabinet, this piece is up for sale. Invested in the piece are 35+ hours of construction, painting and weathering. The piece is finished in acrylics, oils, and weathering pastels, and a matt varnish has been applied to protect it. Included is the custom wooden base and silver display plaque.
THIS PIECE HAS BEEN SOLD.
Painted and weathered, includes wooden display base
£149.99
THIS PIECE HAS BEEN SOLD.
The European release of Moebius' 1/32 Colonial Viper Mk. II is through Revell of Germany. Fully assembled, painted and weathered to represent Apollo's Mk. II bird in need of some attention from Chief Tyrol. This model was built as a non-ownership commission for eModels.co.uk and the build was filmed in a series of twelve videos, which you can see at this link. As I already have a Viper in my cabinet, this piece is up for sale. Invested in the piece are 35+ hours of construction, painting and weathering. The piece is finished in acrylics, oils, and weathering pastels, and a matt varnish has been applied to protect it. Included is the custom wooden base and silver display plaque.
THIS PIECE HAS BEEN SOLD.
|
|
SOLD: Master Grade 1/100 Freedom Gundam Ver. Wolf
Completed display Gunpla with custom colour shceme.
I couldn't resist building the Freedom Gundam - look at those wings! Hoo boy. I decided on a custom colour scheme to make something a little different from the usual primary colours. Not canon, I know, but who cares?
The kit was fully repainted and weathered to look used and functional, but not too battered. The inner frame was painted with metallics to keep a shiny, metal look. In-kit stickers and dry-rub transfers were ignored and waterslide decals used instead. It was built as a snap-fit kit as designed with only a minimal amount of permanent gluing resulting in articulation and poseability being maintained. The model was finished with Tamiya acrylic paints and Mig 502 Abteilung Oil paints. A full video build series for this model is available on my Youtube channel here.
THIS PIECE HAS BEEN SOLD.
Completed display Gunpla with custom colour shceme.
I couldn't resist building the Freedom Gundam - look at those wings! Hoo boy. I decided on a custom colour scheme to make something a little different from the usual primary colours. Not canon, I know, but who cares?
The kit was fully repainted and weathered to look used and functional, but not too battered. The inner frame was painted with metallics to keep a shiny, metal look. In-kit stickers and dry-rub transfers were ignored and waterslide decals used instead. It was built as a snap-fit kit as designed with only a minimal amount of permanent gluing resulting in articulation and poseability being maintained. The model was finished with Tamiya acrylic paints and Mig 502 Abteilung Oil paints. A full video build series for this model is available on my Youtube channel here.
THIS PIECE HAS BEEN SOLD.
|
|
SOLD: Fine Molds 1/48 T-65 X-Wing Red 5
Completed Display Model incl. Custom Display Base
Up for sale is this fully assembled and painted Fine Molds 1/48 X-Wing display model of Luke Skywalker's "Red 5", complete with custom built display stand. Not assembled as a snap-kit, it has been carefully constructed using traditional modelmaking methods and includes over 50+ hours of construction, painting and weathering to an exceptionally high standard. The model is finished in acrylics and oils to represent Luke Skywalker's battered, filthy vehicle, in desperate need of maintenance and repair. The model has been varnished. Included is the custom-made wooden display stand that will make this piece the pride of your collection. View the gallery here.
These kits are now very hard to get and will soon be discontinued and rarity will only increase the cost of a pre-built model, so snap it up now before it is too late.
THIS PIECE HAS BEEN SOLD.
Completed Display Model incl. Custom Display Base
Up for sale is this fully assembled and painted Fine Molds 1/48 X-Wing display model of Luke Skywalker's "Red 5", complete with custom built display stand. Not assembled as a snap-kit, it has been carefully constructed using traditional modelmaking methods and includes over 50+ hours of construction, painting and weathering to an exceptionally high standard. The model is finished in acrylics and oils to represent Luke Skywalker's battered, filthy vehicle, in desperate need of maintenance and repair. The model has been varnished. Included is the custom-made wooden display stand that will make this piece the pride of your collection. View the gallery here.
These kits are now very hard to get and will soon be discontinued and rarity will only increase the cost of a pre-built model, so snap it up now before it is too late.
THIS PIECE HAS BEEN SOLD.
|
|
SOLD: Timeslip Creations Gemini Freighter
Completed resin model mounted on custom base
Up for sale is this charming TEENY TINY resin model of the Gemini Freighter from Battlestar Galactica. This miniscule member of the rag-tag fleet has been painted using acrylics, oils and weathering pastels to resemble a hodgepodge of the original series model and the reboot-series ZOIC CGI miniature. It is mounted on a simple wooden base adorned with the Colonial mark. A delight for any collector to add to his collection - takes up VERY little space!
THIS PIECE HAS BEEN SOLD.
Completed resin model mounted on custom base
Up for sale is this charming TEENY TINY resin model of the Gemini Freighter from Battlestar Galactica. This miniscule member of the rag-tag fleet has been painted using acrylics, oils and weathering pastels to resemble a hodgepodge of the original series model and the reboot-series ZOIC CGI miniature. It is mounted on a simple wooden base adorned with the Colonial mark. A delight for any collector to add to his collection - takes up VERY little space!
THIS PIECE HAS BEEN SOLD.
|
|
SOLD: "Bad Place To Break Down" Tatooine Diorama
Completed display models set in a rocky desert diorama
Up for sale is this charming diorama set including Revell's dubious-scale yet probably 1/24th Landspeeder, Verlinden's 1/24 Luftwaffe Pilot figure, tools and equipment from Tamiya's 1/24 Rally Mechanics Set and Italeri's Truck Shop Accessories set, various bits of LEGO and a bit of an old Giant Bomb t-shirt. Greebles and cockpit details have been added from a Tamiya 1/35 Panzer IV kit. The rocky desert landscape is custom-built and the landspeeder "hovers" on two small acrylic rods. The piece was finished using a number of different mediums including wood, acrylics, oils, weathering pastels, housebrick, plaster rock, clay, railway scenery ballast and bits of my garden. A tiny unlucky creature of some sort got included in garden stuff and is forever preserved in the barrren landscape.
The piece has had the living heck weathered out of it as is expected for any non-Imperial hardware. Due to the excessive weight of the piece, I cannot offer free shipping.
THIS PIECE HAS BEEN SOLD.
Completed display models set in a rocky desert diorama
Up for sale is this charming diorama set including Revell's dubious-scale yet probably 1/24th Landspeeder, Verlinden's 1/24 Luftwaffe Pilot figure, tools and equipment from Tamiya's 1/24 Rally Mechanics Set and Italeri's Truck Shop Accessories set, various bits of LEGO and a bit of an old Giant Bomb t-shirt. Greebles and cockpit details have been added from a Tamiya 1/35 Panzer IV kit. The rocky desert landscape is custom-built and the landspeeder "hovers" on two small acrylic rods. The piece was finished using a number of different mediums including wood, acrylics, oils, weathering pastels, housebrick, plaster rock, clay, railway scenery ballast and bits of my garden. A tiny unlucky creature of some sort got included in garden stuff and is forever preserved in the barrren landscape.
The piece has had the living heck weathered out of it as is expected for any non-Imperial hardware. Due to the excessive weight of the piece, I cannot offer free shipping.
THIS PIECE HAS BEEN SOLD.
|
|